Magnadyne M4-LCD - Manual (Page 39)

39
NAV
Satellite Radio Operation
Please note that satellite radio signal may be blocked by trees, buildings or other obstacles.
Channel Selection Modes:
Channels are selected by the following methods:
• Manual Tuning: Use the Manual Tuning method to scan thru the channels.
• Direct Tuning: Use the Direct Tuning methods when you know the desired channel.
• Category Tuning: Use the Category Tuning method when you know what category you want to scan
for a channel.
Information display during reception:
CHECK ANTENNA: When an antenna issue exists.
ACQUIRING SIGNAL: When a channel is being tuned-in (no signal is yet received).
CHANNEL NOT AVAILABLE: A channel without a broadcast has been selected or the receiver may not be activated.
CALL 1-866-635-2349 TO SUBSCRIBE: A channel not covered by your contract or the tuner is not acti-
vated. Call Sirius Service Center 1-866-635-2349 or visit them online at www.siriusxm.com.
Manual Tuning:
Press the CH - or CH + button until the desired
channel appears in the display.
Direct Tuning:
1. Press the MENU button.
2. Press the DIRECT CH button.
NAV
NAV
NAV
3. Enter the channel number then press the
ENTER button. For example: For Sirius
Channel 121, press 1, 2, 1 and then press
the ENTER button. The channel will auto-
matically start playing.
Note: To enter a new number press the CLEAR
button before entering a new channel numbers.