Morphy Richards 47076 - Manual (Page 6)

66 UUKK HHeellpplliinnee 00884444 887711 00994466 RReeppllaacceem meenntt PPaarrttss 00884444 887733 00771122 IIrreellaanndd HHeellpplliinnee 11880000 440099 111199
B B
BUTTONS
KEY
ON/OFF
Auto timer
Warmer
CONTROL PANEL
Switching on
• When the machine is switched
on, the display will illuminate.
• To set the time, press the HOUR
button. It is a 24 hour clock with
AM or PM denoted.
• Then press the MINUTE button.
To brew at a pre-set
time
• Press the PROGRAM button.
Note: If no buttons are pressed,
the display will revert to the time
display within 10 seconds.
• Press the HOUR button.
• Then press the MINUTE button
to set the desired start time.
• Press the AUTO button (green
light glows).
Note: Press the AUTO button
again to cancel pre-set brewing.
To brew manually
• Press the ON/OFF button (red
light glows).
Note: Press the ON/OFF button
again to cancel brewing.
Adjustable warming
plate temperature
• This coffee maker gives you the
option of adjusting the Stay
Warm Setting to slightly reduce
the temperature of the coffee
after it has brewed.
• When brewing the coffee, a
steady orange light will appear
on the ‘warmer’ button. In order
to reduce the Stay Warm setting,
push the ‘warmer’ button once,
and the steady orange light will
then blink.
• This setting should be used
when the carafe is half full or
less, to ensure the coffee quality
is maintained.
• The Stay Warm setting will
continue to operate as long as
the unit is ON and will shut off
automatically after two hours.
• When you begin to brew a new
pot of coffee, the steady orange
light will reappear, indicating the
Coffeemaker will maintain the
temperature of the higher Stay
Warm Setting.
Coffee quality
indicator
B B
• To help you to decide if your
coffee is likely to be of a good
quality during keep warm mode,
bars on the outside of the clock
face indicate how long ago the
coffee was brewed.
47076 Rev2 18/6/08 13:58 Page 6