Motorola H300 User Manual

Before you begin, Insert battery, Start bluetooth feature

Advertising
background image

Start Here > > >

Get Connected in

4 Quick Steps

MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The Bluetooth trademarks are
owned by their proprietor and used by Motorola, Inc. under
license. All other product or service names are the property of
their respective owners.

The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.

© Motorola, Inc. 2005.

Motorola, Inc.

Consumer Advocacy Office

1307 East Algonquin Road

Schaumburg, IL 60196

www.hellomoto.com

1-877-MOTOBLU

1-800-331-6456 (United States)

1-888-390-6456 (TTY/TDD United States for

hearing impaired)

1-800-461-4575 (Canada)

Part Number: 6809495A08-A

If you need more help, contact us at

1-877-MOTOBLU.

H300

Bluetooth®

Handsfree Headset

1 - INSERT BATTERY
2 - START
BLUETOOTH
FEATURE
3 - PAIR
4 - TEST AND USE

BEFORE YOU

BEGIN

Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.

Take a moment before you get started to

familiarize yourself with your new

H300 Handsfree Headset

.

Blue

Indicator

Light

Call

Button

Volume

Buttons

Microphone

Speaker

Battery

Door

Earhook

1

Insert a new battery into your headset:

Open the battery door at the back of the

headset.

Insert a new battery so that the + and -

markings match the markings in the

battery compartment.

Close the battery door.

1

2

INSERT BATTERY

3

START BLUETOOTH

Feature

On Your Phone

2

Select (

Menu

)

> Settings > Connection >

Bluetooth Link > Setup.

Scroll to Power.

Press Change.

Scroll to On.

Press Select to turn on the Bluetooth

feature. Bluetooth feature remains on until

you turn it off.

1

2

3

4

5

M(

Your phone's Bluetooth feature is off by

default. To use your headset, turn on the

Bluetooth feature in your phone.

For most Motorola phones:

Note: These steps are for most Motorola phones. For

other phones, see your phone's user's guide.

TROUBLESHOOTING

My phone does not find my headset.

Make sure the blue light on your headset is

steadily lit when your phone is searching for

devices (see step 3).

My headset worked before but now it's
not working.

Make sure your phone is on and the

Bluetooth feature is turned on in your phone

(see step 2). If the Bluetooth feature has

been turned off or was turned on only

temporarily, you may need to restart the

Bluetooth feature (see step 2). If you have

confirmed the Bluetooth feature is on in your

phone, pair your phone and headset again

(see step 3).

Support.

If you need more help, contact us at

1-877-MOTOBLU or visit us at

www.hellomoto.com/bluetooth and click

Support.

PAIR

Your Headset

3

With the headset power off, press and hold

the Call button for 6 to 10 seconds until the

blue indicator light turns on and remains

steadily lit. (The light will flash while you

hold the Call button.)

If the indicator light is flashing or does not

remain steadily lit, turn off the headset and

repeat step 1.

1

2

Before you can use your headset, you must

pair (link) it with your phone.

Step A - PUT HEADSET IN PAIRING MODE

Note: To turn off headset, see "Turning On and Off" on the

reverse side of this guide.

Blue

Indicator

Light

Call

Button

PAIR

Your Phone

Select (

Menu

)

> Settings > Connection >

Bluetooth Link > Handsfree > Look for Devices.

The phone lists all Bluetooth devices it finds.
Select Motorola H300.
Press OK or Yes to pair (link) the handsfree

device.
Enter the passkey 0000 and press OK.
Note: Passkey cannot be changed

from 0000.

Step B - SET THE PHONE TO LOOK FOR
YOUR HEADSET

3

4

1

2

M(

When your headset is successfully paired with

your phone, the blue indicator light changes

from steadily lit to flashing.

Note: These steps are for most Motorola phones. For other

phones, see your phone's user's guide.

For most Motorola phones:

Your phone and headset are now paired and

ready to make and receive calls. To confirm

they are operating properly, make a call:

TEST AND USE

Place the headset over your ear. See

"Wearing the Headset" on the reverse side

of this guide.

On your phone, dial the number you want

to call and press the

Send key.

If your phone and headset are successfully

paired, you will hear ringing on the headset.

4

1

2

3

After you have successfully paired your phone

and headset, you do not need to repeat these

initial setup steps each time you use the

headset.

USING YOUR H300

See Features and Functions Guide

on the reverse side

of this guide

for information on

using your H300.

In Your Headset

Advertising