Places, Creating a go to to a place, Geocache – Magellan Triton 300 User Manual
Page 21: Creating a geocache go to route
Go To Menu
14
Places
Creating a Go To to a Place
1.
Access the Main Menu and select “Go To”.
2.
Select “Place” from the Go To menu.
3.
Select the map to be used. (Basemaps contain limited places to
select from. Detailed maps include a wide variety of points of
interest.)
4.
If “Detailed Map” is selected, choose a detailed map and press
Enter.
5.
Select a category and press Enter.
6.
Select a subcategory, if required, and press Enter.
7.
Select a place from the list and press Enter.
8.
The Place Information screen is displayed. To activate the Go To, highlight
and press
Enter.
9.
Highlight
and press Enter.
Geocache
Creating a Geocache Go To Route
1.
Access the Main Menu and select “Go To”.
2.
Select “Geocache” from the Go To menu.
3.
Select a saved geocache waypoint from the list and press Enter. Select
and press
Enter.
4.
The Geocache Information screen provides the fields needed to identify the waypoint and its
location. The fields can be modified to customise the waypoint.
Icon: Highlight the icon and press Enter to display all possible icons that can be used for a
waypoint. Select the icon desired and press Enter.
Geocache Name: (Default “GCXXX”). Highlight the waypoint name field and press Enter to
display the keyboard. Enter the name and select the green button.
Location: Selecting the latitude or longitude fields brings up the keyboard that can be used
to enter the desired data.
Elevation: Highlight the Elevation field and press Enter to display the keyboard. Enter the
elevation and select the green button.
Difficulty: Assign a difficulty rating to this cache.
Terrain: Indicate the type of terrain the cache is located in.