Miele DA 249-4 - Manual (Page 29)

a 2 protective shields
prevent scratches to the chimney
during installation.
b 2 hose clips for securing the
ducting.
c 1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
d Upper retaining plate secures the
chimney extension.
e Middle retaining plate for
additional stability of the chimney.
f Lower retaining plate secures the
canopy and motor assembly.
g Installation kit for recirculation
mode contains diverter, 2 grilles and an
hose (optional accessory)
Caution: During the installation
process, please be careful of sharp
edges that can cause harm.
Installation instruction sheet
8 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy.
(S8 wall anchors included in the
packaging are not for use in USA / CDN.)
2 M 6 locking nuts for securing the
motor assembly.
2 screws 3.9 x 7.5 mm for securing the
chimney.
2 screws M4 with locking nuts and
plastic washers for securing the glass
canopy.
1 allen wrench
for adjusting the unit height and fixing
the operating unit.
1 screw cover
1 lever for disassembling the chimney
Installation accessories
29