Memorex MKS2116 - Manual (Page 12)

11
To repeat a single track, press the
REPEAT button ❶ once; the
REPEAT indicator will blink.
Press the Skip/Search ( ) ❷ or
( ) ❸ button to select the
specific track that you wish to
repeat. When the desired track
number blinks in the display,
within five seconds, press the
PLAY/PAUSE (® ) button ❹ to
begin playback. The specific track
you selected will be repeated
continuously.
2 3
1
1
To cancel Repeat Playback,
press the REPEAT button ❶ until
the REPEAT indicator goes out.
You can also cancel Repeat
Playback by pressing the Stop
(■) button ❷.
2 3
1
2
3
To repeat all of the tracks on a
disc continuously, while in the
Stop mode, press the REPEAT
button ❶ twice; the REPEAT
indicator will light solid. Press the
Play/Pause (® ) button ❷ to
repeat all tracks.
2 3
1
2
2
REPEAT PLAYBACK
Rotate the POWER control to the
ON position to turn the unit on.
1
1
Press the PROGRAM button; “0”
will blink in the display and the
PROGRAM indicator will blink.
3
3
Press the OPEN/CLOSE area to
open the CD compartment door.
Place a CD on the center spindle,
with the printed label side facing
up. Close the CD compartment
door.
1
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 19 track programmable memory that allows you to program up to 19 tracks
on any disc for playback in any desired order. You may program 19 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
OPERATION (CONTINUED)
PROGRAMMED PLAYBACK CONTINUED ON THE NEXT PAGE