Motorola SURFboard SB3500 - Manual (Page 14)

9
If you already have a TV connected to the cable outlet, you will need to use a 5-900 MHz splitter. Connect the coaxial cable
as shown below:
LINE 2 LINE 1 ENET POWER
CABLE
FOR HOME OR OFFICE USE
Tested To Comply
With FCC Standards
I nput Voltage 48V 380mA
SURFboard Model SB3500
MOD EL: SU RFb oa rd SB 35 00
Made in Taiwan, R. O. C.
S /N: P PP P MMY JJJ SS SSS CKA ABB CCCC
CUST S/ N: BCDFGHJKLMNP
P /N: 473451-001
HFC MAC ID: A BCDEF012345
5-900
MHz
splitter
To cable
outlet
To TV
2 Connect the 10Base-T Ethernet cable to the SB3500 connector marked ENET and the other end to the Ethernet jack on the
back of your computer.
3 Connect your telephone to the SB3500 connector marked LINE 1. A separate phone line can be connected to the SB3500
connector marked LINE 2.
Each line connector on the SB3500 supports up to five telephones (one REN per telephone).
4 Connect the power brick or UPS cable to the SB3500 connector marked POWER as shown in the following sections.