Multi-Tech Systems ACCESS POINT RF802EW - Manual (Page 20)

RouteFinder Quick Start Guide
20
15.The Modem Initial Command dialog box displays.
Select your modem manufacturer and model and click OK.
Note: This setting configures the initial string of the asynchronous port on the RF802EW
so that it will know how to communicate with your modem. If you are using an analog
modem and your modem is not included in the selection list, in most cases, Standard
Modem will work. If you are using an ISDN TA, refer to the ISDN TA’s User Guide for
information on the initialization and hang up strings. Use RouteFinder Manager to enter
your modem or TA strings.