Marantz ZC4001 - Manual (Page 11)

ENGLISH
8
STANDBY MODE SETTING
The ZC4001 has two Standby Modes. The
Standby Mode is set as follows.
ECONOMY: This is a low power consumption
mode. The clock is not displayed.
NORMAL: This is the normal standby mode. The
clock is displayed.
1. Press the ENTER button once, then press the
button six times.
2. Press the ENTER button again.
3. Each time the and buttons are pressed,
t h e S t a n d b y M o d e s w i t c h e s b e t w e e n
“
ECONOMY ” and “ NORMAL ”.
When “ ECONOMY ” is set as the Standby
Mode, the time is not displayed when the unit
is on standby.
Also, the Wake Up Timer cannot be set in the
Economy mode.
4. Press the ENTER button to return to the
normal display.
1. 2. 4. 3. 1.
1 .
CLOCK SETTING
The time is set as follows.
1. Press the ENTER button once, then press the
button five times.
2. Press the ENTER button again.
3. Each time the and buttons are pressed,
the clock switches between the 12-hour and
24-hour display.
4. Press the button to get the hour setting.
5. Press the and buttons to set the hour.
6. Press the button to get the minutes setting.
7. Press the and buttons to set the
minutes.
8. Press the ENTER button to start the clock and
return to the normal display.
1. 2. 8. 4. 6.
3. 5. 7. 1.
1 .
DISPLAY DIMMER SETTING
The brightness of the FL display can be adjusted.
The display darkens in the order of OFF
→
LEVEL1 → LEVEL2 → LEVEL3.
1. Press the ENTER button once, then press the
button four times.
2. Press the ENTER button again.
3. Select a dimmer level. Each time the button
is pressed, the brightness of the FL display
changes in the order of
OFF
→ LEVEL1 → LEVEL2 → LEVEL3 →
OFF.
Each time the
button is pressed, the
brightness of the FL display changes in the
order of
OFF
→ LEVEL3 → LEVEL2 → LEVEL1 →
OFF.
4. Press the ENTER button to return to the
normal display.
1. 2. 4. 3. 1.
1 .
SOUND EFFECT SETTING
The Sound Effect mode is set as follows: Sound
dynamics increase in the order of MODE1
→
MODE 2 → MODE3.
Setting the NIGHT MODE compresses the
dynamic range .
This softens loud passages such as sudden
explosions, to help prevent disturbing others late
at night.
1. Press the ENTER button once, then press the
button three times.
2. Press the ENTER button again.
3. Select a Sound Effect mode. Each time the
button is pressed, the Sound Effect mode
changes in the order of
OFF
→ MODE1 → MODE2 → MODE3 →
NIGHT MODE → OFF.
Each time the button is pressed, the Sound
Effect mode changes in the order of
OFF
→ NIGHT MODE → MODE3 → MODE2
→ MODE1 → OFF.
WOW is activated in all three Sound Effect
modes: 1, 2 and 3.
4. Press the ENTER button to return to the
normal display.
1. 2. 4. 3. 1.
1 .
06.3.30, 9:10 AM Page 8