Memorex MVDP1083 - Manual (Page 8)

AC CONNECTION
Insert the small end of the AC adapter into the DC IN jack (located on the side of the
unit). Connect the AC cord to the adapter and connect the other end to a wall outlet
having 120V AC, 60 Hz.
AC Adapter, DC 9V Z
NOTES:
• The AC adapter supplied with the unit is polarized to help minimize the possibility
of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not
file or cut the wide blade. It is the user’s responsibility to have an electrician
replace the obsolete outlet.
• Use the enclosed AC adapter for this product only.
• Remove both the DC plug and the AC-IN plug to disconnect the AC adapter when
not using.
BATTERY PACK INSERTION/REMOVAL
Follow the diagram below to insert or remove the battery pack.
7
POWER SOURCES
AC Plug
AC Outlet
TO REMOVE: Slide the Battery Release
switch in the direction of arrow A, then slide
the Battery Pack in the direction of arrow B.
1
TO INSERT: Align tabs from the battery into
the holes in the unit, then slide the battery in
the direction of arrow A.
2