Mitel M I T E L 8620 - Manual (Page 51)

Mitel ® 8620/8622 IP Phone User Guide – Issue 13, September 2009 Page 37
Call Features
Remote Programming
You can use Remote Programming to access the Do-Not-Disturb (DND), Call Forwarding,
Personal Call Routing features from another system phone or an external phone.
Entering a Remote Programming Password
Before using Remote Programming, you should enter a new password.
To enter a Remote Programming password:
1. Dial 392. ENTER PASSWORD appears.
2. Enter your current password (the default password is your extension number), followed
by #. CHANGE PASSWORD TO appears.
3. Enter the new password followed by #. VERIFY PASSWORD appears.
4. Enter the new password again followed by #. DATABASE UPDATED appears.
To change the station password from another phone, see “Using Remote Programming to
Change the Password” on
page 37 .
Using Remote Programming to Change the Password
You can use Remote Programming to change the station (phone) password.
To use Remote Programming to change the station password:
1. Do one of the following:
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 392.
6. Enter the new password followed by #.
7. Enter the new password again followed by #.
NOTE
A Direct Inward System Access (DISA) number is required to use Remote
Programming from an external phone. Contact your system administrator for more
information.