Installing the modem driver in windows 2000 – Multi-Tech Systems MTCBA-G-U-F4 User Manual
Page 16
Chapter 3 – Using Your Wireless Modem
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide
16
Installing the Modem Driver in Windows 2000
Part A for Windows 2000: Installing the USB Driver
1.
Connect the USB cable between the MultiModem and the PC.
2.
Insert the MultiModem CD into your CD-ROM drive. The CD uses the Autorun feature, and
after a brief delay, the MultiModem Setup – Welcome screen appears. Close the Welcome
screen.
3.
After a brief delay, the Welcome to the Found New Hardware Wizard screen appears. This is
the first of three New Hardware Wizards that will appear.
Click
Next.
4.
The Install Hardware Device Drivers screen appears referring to the TUSB3410 Serial Port
device.
5.
Click on Search for a suitable driver for my device (recommended)
Click
Next.
6.
The Locate Driver Files screen appears. Click in the Optional search locations: on CD-ROM
drive option.
Click
Next.
7.
The Driver Files Search Results screen appears. The wizard has found the wrong driver.
Click on Install one of the other drivers.
Click Next.
8.
At the Driver Files Found screen, choose the GPRS Device from the listing.
Click Next.
9.
A Digital Signature Not Found screen may appear depending on operating system settings.
Click Yes.
10.
At the Completing the Found New Hardware Wizard screen, click Finish.
Installation of the USB driver is now complete.
The second Found New Hardware wizard will start automatically to associate the PC port with the USB
driver.