Metrologic Instruments MS770 - Manual (Page 3)

1
Introduction
Metrologic’s TECH 7 laser bar code projection scanner is encased in an
NEMA-12 steel case. The case construction enables the scanner to operate in
harsh surroundings, especially industrial environments. Water-resistant,
shock-resistant, and rugged, the TECH 7 is also fast, aggressive and reliable. It
can register bar codes at a range of 76mm - 254mm (3" - 10") and can
autodiscriminate among all common codes.
To suit particular applications, two different scan patterns are available: an
omnidirectional pattern of 20 interlocking lines (Model MS770); or a 12-line
raster pattern (Model MS775). The scanner has a VLD design, a scan speed of
up to 2000 lines per second, and uses less than 8 watts of power.
Other features include an Application Specific Integrated Circuit (ASIC) and
MECCA (Metrologic Enhanced Code Correcting Algorithm). An Application
©
Specific Integrated Circuit (ASIC) is in the decoding system and virtually
eliminates misreads. MECCA (Metrologic Enhanced Code Correcting
©
Algorithm) enables the TECH 7 scanner to read poorly printed, wrinkled or
even torn bar codes on the first pass.
Unpacking List
The shipping carton, should contain the following:
! Installation and User’s Guide (MLPN: 2159)
! ScanSelect Scanner Programming Guide (MLPN: 2186)
! TECH 7 Model MS770 with omnidirectional scan pattern or
TECH 7 Model MS775 with raster scan pattern
! Communication Cable with Power Supply (optional) or
Communication Cable (optional)
! Back Plate (optional) or Stand (optional)
If any item is missing or to order additional items, contact the dealer, dis-
tributor or call Metrologic’s Customer Service Department at 1-800-ID-
METRO or 1-800-436-3876.