Mellerware TWEETY WB201302000W User Manual

Page 3

Advertising
background image

Safety advice and cautions
- Read these instructions carefully before switching
on the appliance and keep them for future refer-
ence. Failure to follow and observe these instruc-
tions could lead to an accident.

Place of use or work:
- Do not use lacquer or sprays with the appliance
turned on.
- Do not use aerosols with the product turned on.

Electrical safety:
- Do not use the appliance if the cable or plug is
damaged.
- Ensure that the voltage indicated on the name-
plate matches the mains voltage before plugging in
the appliance.
- Connect the appliance to a socket that can supply
a minimum of 16 amps.
- The appliance’s plug must fit into the mains sock-
et properly. Do not alter the plug. Do not use plug
adaptors.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or ex-
posed to moisture. If water gets into the appliance,
this will increase the risk of electric shock.
- If any of the appliance’s casing breaks, immedi-
ately disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it has
a leak.
- WARNING: Keep the appliance dry.
- WARNING: Do not use the appliance near water.
- Do not use the appliance near bathtubs, showers
or swimming pools.
- Do not use the appliance with damp hands or feet,
or when barefooted.
- Do not force the electrical wire. Never use the
electric wire to lift up, carry or unplug the appliance.
- Do not wrap the cable around the appliance.
- Do not allow the electric cable to get stuck or bent.
- Do not allow the electric cable to come into con-
tact with hot surfaces on the appliance.
- Check the condition of the electric cable. Dam-
aged or knotted cables increase risk of electric
shock.
- As additional protection for the electrical installa-
tion that provides electricity to the appliance, the
use of a differential current appliance with maxi-
mum sensitivity of 30mA is recommended. Consult
a qualified installation technician.
- Do not touch the plug with wet hands.

Use and care:
- Fully unroll the appliance’s power cable before
each use.
- Do not use the appliance if the parts or accesso-
ries are not properly fi tted.
- Do not use the appliance if the on/off switch does
not work.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task, adjustment, recharge or change of
accessories.
- This appliance is not for professional or industrial
use, it is intended for household use only.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with
the appliance.
- This appliance is intended for adult use. Ensure
that this product is not used by the disabled, chil-
dren or people unused to its handling.
- This appliance should be stored out of reach of
children and/or the disabled.
- Make sure that the fan grill on the appliance is not
blocked by dust, dirt or other foreign objects.
- Do not use the appliance to dry pets or animals.
- Do not use the appliance to dry textiles of any
kind.
- Any misuse or failure to follow the instructions for
use renders the guarantee and the manufacturer’s
liability null and void.

Instructions for use
Before use:
- Remove the protective wrapping from the
appliance.
- Make sure that all the product’s packaging has
been removed.

Use:
- Completely unroll all the cable before plugging in.
- Connect the appliance to the mains.
- Point the appliance for directing the airflow in the
direction desired.
Slide the speed selector (A) from the OFF position
to the highest level in order to increase the airflow.
- Slide the temperature selector (B) from the lower
to the upper position to increase the temperature
of the airflow.
- The hairdryer has a cold air blast (C) Air concen-
trator with narrow nozzle
- Add the concentrator to guide the flow of air to a
determined part (ends, curls, etc.)

Once you have finished using the appliance:
- Turn off the appliance by switching the speed se-
lector to 0.

WB_20130 PRO 2000_IM.indd 3

WB_20130 PRO 2000_IM.indd 3

5/3/2010 1:32:33 PM

5/3/2010 1:32:33 PM

Advertising