Motorola DSR405 - Manual (Page 27)

DSR405 User Guide 13
2
Using Your Receiver
Most viewers find it more convenient to use the keys on the remote control rather
than the keys on the front panel of the receiver. But even though there are far
fewer keys on the receiver, they still allow you to control most receiver functions.
After plugging in your receiver, allow it to "warm up" for 30 seconds before using
it.
Make sure to tune your TV to Channel 3 or 4 (the channel you use for your VCR)
when using the receiver if instructed to do so by your installer.
Front Panel Key Descriptions
1. POWER. Press this key to turn the receiver power on/off and to watch pro-
grams in SAT mode.
2. FRONT PANEL DISPLAY. This area displays a flashing indicator each time
you press a remote control key.
1 2
4 5 6 3 7