Miele DA 6290 W - Manual (Page 14)

Filter timer
l—
A timer records the hours of fan
operation.
The filter timer will signal that the
grease filter
l or the charcoal filter —
needs to be cleaned or changed.
See the "Cleaning and care " chapter
for information on cleaning filters and
resetting the timer.
Reprogramming the filter timer
l
The timer may be set to suit your
cooking habits.
– If you often roast and fry foods,
choose a shorter operating time.
– If you tend to cook fat-free, choose a
longer operating time.
– If you cook only occasionally, it is
better to choose a shorter operating
time. This is because accumulated
grease will harden over time, making
cleaning difficult.
The factory setting for the grease filter
timer is 30 hours. You can adjust the
time to 20, 30, 40 or 50 hours.
^ Press the On/Off button K to turn off
the fan.
^ Press the Delayed Shut Down 5 ¢15
and filter button
l— at the same
time.
The indicator for the grease filter timer
l and one of the power level indicators
will flash.
The 1 to IS indicators show the
programmed time:
Indicator 1 = 20 hours
Indicator 2 = 30 hours
Indicator 3 = 40 hours
Indicator IS = 50 hours
^ Press the "–" symbol to select a
shorter operating time or the "+"
symbol for a longer one.
^ Store the selection by pressing the
filter button
l—.
All the lights will go out.
If the procedure is not stored within 4
minutes, the hood will automatically
default to the original setting.
Operation
14