Mellerware 35400 - Manual (Page 3)

CAUTION
• Remove the packing and make sure that the appliance
is intact. In case of doubt do not use the appliance
and contact our after-sales service. Do not leave
packaging materials like bags and staples within
reach of children.
• Before switching on appliance check if the electrical
voltage and frequency of the circuit correspond to
those indicated on the appliance.
• The appliance has to be connected to a circuit
according to the rules in force concerning the civil
plant. The plant has to be related to the nominal
power of the appliance and has to be provided with an
earth-wire.
• Use the appliance only for the mentioned purpose,
namely as a radiator for domestic use. Do not use it
for any other application as it could get dangerous.
• The supplier is not responsible for any eventual
damages caused by improper or faulty use.
The use of every electrical appliance
calls for the awareness of some basic
rules, such as:
• Never touch the appliance with wet or damp hands or
feet.
• Never expose the appliance to atmospheric conditions
(rain, sun, etc.).
• The appliance must be always placed on a flat and
stable surface.
• Switch the appliance off and unplug it before cleaning.
• When the appliance is not in use switch it off and
unplug it. Make harmless the parts of the appliance
which could be handled hazardously by children for
playing.
• Do not use the radiator near bath-tubs, showers,
wash-basins or swimming pools (minimum distance 1
meter).
• Do not put the cable on the appliance when it is still
warm.
• A correct operation of the appliance is obtained when
the radiator is installed vertically. Do not switch on the
fan heater near pieces of furniture, curtains, shelves,
etc.
• Do not use the appliance near liquids or flammable
matters.
• Never operate the appliance immediately below an
outlet.
• ATTENTION: Do not connect the appliance to a
device switching the appliance automatically on
such as a thermal control device or a time switch to
avoid overheating risks when the radiator is moved or
covered.
• Do not cover the appliance when it is running to avoid
overheating risks.
• In case the power cord is damaged send it to the
nearest after sale service recommended by the
supplier for the replacement.
• Children, old people and disabled people are not
often aware of the dangers, which can derive from
improper use of the appliance. The appliance should
never be used without an adult supervision.
• Do not connect the appliance to extension cords or
multiple outlets.
• Do not damage and do not kink the power cord.
• Before cleaning the appliance or carrying out any
maintenance switch off the whole system.
• If the appliance is out of work switch it off without
tampering it. If any repair is required please contact
only the after-sale centres approved by the supplier
and ask for original spare parts. Otherwise safety of
the appliance can be compromised.
ASSEMBLY
Assemble the body frame and the base plate together as
the following sequences:
1. Remove the butterfly nuts from the lower part of the
body frame.
2. Insert the power cord through the slot placed in the
middle part of the basement and then assemble the
body frame to the base plate.
3. Secure the body frame to the base plate by means of
the two butterfly nuts previously removed. Insert the
power cord through the suitable slots and then fix it by
the clamp.
OPERATION
• Plug in the appliance. Check that the outlet has at
least a 10 AMPERE current carrying capacity.
SWITCHES FUNCTIONS
• Select the power by suitable switches. Press the
oscillating switch TURN to make the radiator oscillate.
Press it again to switch off the oscillating movement of
the appliance.
• The radiator can be activated manually by pressing
the handle situated in the rear part of the appliance.
SAFETY DEVICE
• This appliance is provided with two safety devices:
the first device disconnects the appliance when the
radiator is tilted or when is tipped by means of a
switch situated in the lower part of the radiator. The
second safety device disconnects the appliance in
case of overheating by means of a thermo fuse.
MAINTENANCE
• The appliance needs only an external regular
cleaning.
• After use and before cleaning always unplug the
appliance and wait till the item is cool.
• Clean the grilles from dust.
• Do not clean the painted parts with emery flour or
solvents and use only a moistened cloth.