Morphy Richards 27004 - Manual (Page 6)

ALARM
Setting the alarm time
•
Press the MODE button briefly until the display shows the
current alarm time.
-The alarm indicator flashes on the display.
•
While the alarm time is indicated, press and hold down the
MODE button until the alarm time indicator starts
flashing.
•
Use the - button to set the hours and the + button to set
the minutes.
•
Press the MODE button once more to store the setting.
-If no button is pressed within 5 seconds,the alarm time setting mode
stops and the setting is stored automatically.
Switching on the alarm
•
Press the ALARM button once until the alarm indicator
appears steadily on the display.
•
Select the desired alarm mode (with radio or with buzzer)
with the RADIO/BUZZER switch.
•
If you select alarm with radio, tune to a station which will
be broadcasting at the alarm time and adjust the volume control to the
required level.
-At the preselected alarm time, the alarm will switch on and switch off
again automatically 90 minutes later.
Interrupting and repeating the alarm
•
The alarm can be interrupted with the SNOOZE button.
-After 5 minutes, the alarm comes on again.
•
It is possible to interrupt the alarm function several times during the
switch-on period.
Switching off the alarm
•
The alarm function can be switched off by pressing the On/OFF or
ALARM button. The alarm remains set to operate the next day.
•
If you wish to switch off the alarm completely, press the ALARM button
briefly, until the alarm indicator disappears.
5