MITSUBISHI ELECTRIC PCL5100 MOTHERBOARD - Manual (Page 19)

P C L 5 1 0 0 B I O S S e t u p & P O S T
4 PCL5100 USER GUIDE
Reserving ISA legacy resources
To reserve interrupts and upper memory block (UMB) regions for
ISA expansion cards, go to the Advanced menu, select PCI
Configuration, then select PCI/PNP ISA IRQ Resource Exclusion
or PCI/PNP ISA UMB Region Exclusion as required.
Multi-boot facility
Immediately after the first screen, a second screen displays various
POST messages such as the memory test. While this screen is on
display, a message at the bottom says:
Press <F2> to enter setup or <ESC> to enter Boot Menu
Even if this message is not displayed, you can press the <ESC> key
and this menu will appear:
This menu can be used to temporarily use another drive or device to
boot your system, for example a bootable CD-ROM, without
having to enter the BIOS setup. Simply use the up and down arrows
to make a selection. This change will not be permanent and the
system boot will revert to the normal BIOS setting the next time
you switch on your system.
Boot Menu
1. Diskette Drive
2. Removable Devices
3. Hard Disk Drive
4. ATAPI CD-ROM Drive
5. Network Boot
< Enter Setup>