MTD 250 - Manual (Page 12)

12
7
Off Season
Storage
and Safety
Labels
NOTE: When storing
any type of power
equipment in an unven-
tilated or metal storage
shed, care should be
taken to rustproof the
equipment. Using a
light oil or silicone, coat
the equipment and
especially any springs,
bearings, and cables.
Off-Season Storage
If the tiller will not be used for a period longer than 30
days, the following steps should be taken to prepare the
tiller for storage.
• Clean the exterior of engine and the entire tiller
thoroughly. Lubricate the tiller as described in the
lubrication instructions.
• We do not recommend the use of pressure washers
to clean your unit. They may cause damage to
spindles, pulleys, bearings, or the engine. The use
of pressure washers will result in shortened life and
reduce serviceability.
• Refer to the engine manual for correct engine
storage instructions.
• Wipe tines with oiled rag to prevent rust.
• Store tiller in a clean, dry area. Do not store next to
corrosive materials, such as fertilizer.
• When storing any type of power equipment in an
unventilated or metal storage shed, care should be
taken to rustproof the equipment. Using a light oil
or silicone, coat the equipment and especially any
springs, bearings, and cables.