Miele KWT1611SF - Manual (Page 45)

^ Push the module into the slot until it
locks into place.
^ Connect the appliance to the power
supply and turn it on. After several
seconds the indicator light
e will
come on.
The indicator light will display different
colors one after the other; any control
light at the end indicates that the
module was correctly installed.
If the indicator light does not come on,
installation of the module was
unsuccessful. In that case, repeat the
process. If that does not correct the
problem, contact Miele.
^ Pull the antenna d straight out.
^ Guide the cover b over the antenna
d and screw on the cover.
^ Angle the antenna d so that it faces
to the right or left.
^ If necessary, disconnect the power
supply and continue installing the
appliance.
If you would like to connect your
appliance to the Home Security
System, proceed now (see "Home
Security System").
Installation
45