MITSUBISHI ELECTRIC SR-HD5 - Manual (Page 23)

Setting Up Your HD Receiver
Page 2-5
Note: When the HD receiver is converting all signals to standard 480i signals
that can be viewed on standard video inputs of TVs, there will be no signals on
the Y, P
r
, and P
b
connectors. When the HD receiver is converting all signals
to 1080i that can be sent to the HDTV input of HD monitors, there will be no
standard 480i signals to standard video inputs of TVs.
HD Receiver with HDTV Monitor and VCR
Follow these steps indicated by the diagram following this text.
1) Connect the satellite dish antenna and terrestrial antenna or cable service to the HD
receiver following the instructions in “HD Receiver and Satellite Dish Antenna with
Terrestrial Antenna or Cable Service” on page 2-3.
2) Connect one set of Component Video Cables (one green Y connector, one red P
r
connec-
tor, and one blue P
b
connector) to the back of the HD receiver using the connections