Moxa Technologies CA-132/132I User Manual
Page 37
Advertising
Software Installation
CA-132/132I User’s
Manual
3-23
After installation is complete, you will be prompted to proceed running setup program. It is strongly
recommended to do so.
Driver Setup
The following are steps for setting up the CA-132 Series(CA-132/CA-132I) driver. Note that it is not
intended to illustrate all the convenient functions of the setup programs when configuring the boards.
Please refer to the F1 on-line help instructions as running setup program.
1. Run the setup program, BIN\SETUP.EXE.
2. Please press Enter to select the proper model name, CA-132 Series. If you install CA-132I model,
select CA-132I Series.
Advertising