Morphy Richards 27005 - Manual (Page 10)

Storing stations
There are 10 memory locations in each waveband available for storing
stations (in total 30 memory locations).
•
Tune to the station you want to store.
•
Press the MEMORY button.
-The indication ‘MEMORY’ will flash on the display for
8 seconds.
•
Press the button (1...10) to which you wish to
assign a station.
-Press the button once for a number from 1 to 5 and twice for a number
from 6 to 10.
-Press MEMORY again to store the station.
-Select and store in this way all desired stations.
Note: If no station is stored within the 8 seconds that ‘MEMORY’ is flashing,
the storing mode is abandoned with no change to the current memory.
Calling up a stored station
•
To call up a stored station, simply press the corresponding button.
-Press the button once for a number from 1 to 5 and twice for a number
from 6 to 10. The unit switches to the station and the display indicates the
frequency, ‘MEMORY’ and the memory location number.
Traffic information/Enhanced other networks (EON)
Some RDS radio stations broadcast traffic information at certain times. These
stations are indicated by the symbol on the display. The EON function is
additional RDS feature to switch to a station broadcasting traffic information.
•
Switch on the radio with the ON/Off button.
•
Tune to an RDS station.
•
The symbol appears.
•
Press the TRAFFIC button once.
•
If the tuned station provides traffic information, the
symbol will light up on the display.
•
If the tuned station does not provide traffic information, the symbol
will not light up and you hear a ‘beep’ tone
when pressing TRAFFIC button.
•
If the tuned station provides EON, the ‘EON’
indicator on the display lights up, next to the
symbol.
FM
R D S MEMORY
FM
R D S MEMORY
FM
R D S
FM
R D S EON
9