Philips Magnavox ELITE ME43BKSP User Manual

Page 20

Advertising
background image

20

Installation Accessories

Description

Cat./ Part No.

Outside Air Kit (Required - Included with Fireplace)

Outside Air Coupler to connect outside air UZI to

fireplace, UZIAD

UZIDF

Outside Air Ducting - Includes 4" insulated flex x 10 ft.

long, UZI

UZI

Fireplace Options

Trim Kit - Gold

H3426

Trim Kit - Brushed Nickel

H3395

Door Capping - Gold

H3393

Door Capping - Brushed Nickel

H3394

Blower

UZY5

Blower Motor Speed Control

VRUW

Fireplace Model ME43 - Approved Venting Components

8" Diameter Chimney - Model ASHT+, S-2100+, HT6000+, HT6103+ or AC
manufactured by Security Chimneys International only.

Notes:

1. (Projet NovaTemp™) HT6000+ is equivalent to S-2100+
2. (Projet NovaTemp™) HT6103+ is equivalent to ASHT+
3. This appliance is equipped with the ASHT Chimney Adaptor. When other chimney

is used, a chimney adaptor for the chimney will be required.

4. Chimney Adaptor (S-2100+ / HT6000+) for CANADA ONLY - If you want to install

a S2100+ / HT6000+ chimney, an adaptor is available (8UCA).

5. AC Chimney is Not recommended at elevations above 4000 feet or in cold

climates where temperatures are likely to fall below 32° F (0° C). When using
AC chimney, an AC8SB starter section must be used before installing an elbow.
When an offset is needed immediately off the top of the fireplace, a starter
section (AC8SB30) is available.

OPTIONAL INSTALLATION ACCESSORIES - ME43

Installation Accessories

Description

Cat./ Part No.

Forced Air Heating Kit

Starter Kit: For wall or furnace installations. Includes

blower (BISZY), flex adaptor and two clamps (BISAF),

blower variable speed control (VRUW), thermo disc

(VTU), blower flex adaptor (BISAVF), and back draft

damper (BISBD)

BISFWK-1

Flex - Choose 15 feet or 25 feet depending on installation

Flex 5 inches ID x 15 feet Long

5FLEX15

Flex 5 inches ID x 25 feet Long

5FLEX25

Starter Kit Separate Components

Blower flex adaptor, includes damper (BISBD)

BISAVF

Blower - 250 CFM

BISZY

Flex adaptor and two clamps for fireplace connection

BISAF

Blower motor speed control

VRUW

Thermo disc - turns motor on when fireplace is hot and

off when cool

VTU

Back draft damper - prevents air blowing from furnace

into fireplace

BISBD

Options

Heating / Cooling Thermostat - 120 Volts

HCTW

Advertising