Cd play, 8english – Marantz CD110 User Manual

Page 13

Advertising
background image

8

ENGLISH

CD PLAY

1.

Press the

button

q

/

z

to switch on the power.

* The CD110's power will also be switched on if the SR110

is connected to the REMOTE CONTROL jack and the
SR110's power is on.

2.

Press the OPEN button

b

to open the panel.

3.

Press the

0

button

n

.

The disc tray is now extended so place the disc on the tray
with its label surface facing up.

4.

Press the

0

button

n

.

5.

Press the

6

button

v

on the main unit or the

3

button

!0

on the remote control unit. If track 1 has been playing for 1
minute and 8 seconds, for instance, the following will
appear on the main display during play.

Play stops automatically when the last track has been
played.

TO PLAY THE DISC AGAIN STARTING FROM THE
FIRST TRACK

Press the

6

button

v

on the main unit or the

3

button

!0

on

the remote control unit.

TO STOP PLAY

Press the

7

button

!2

/

x

.

TO REMOVE THE DISC

Press the

0

button

n

to open the disc tray, remove the disc,

and press the button again to close the disc tray. Keep the disc
tray closed without fail when the unit is not going to be used.

CD

TRACK

TRACK

TIME

TO TEMPORARILY STOP PLAY

Press the

6

button

v

on the main unit or the

8

button

⁄4

on

the remote control unit.
The pause indicator (

8

) lights, and the disc play is temporarily

stopped where the button was pressed.

To resume play, press the

6

button

v

on the main unit or the

3

!0

or

8

!4

button on the remote control unit.

TO SWITCH THE TIME DISPLAY

Press the DISPLAY button during play. Each time this button is
pressed, the display changes in sequence from "elapsed track
time"

fi

"remaining track time"

fi

"total remaining time"

fi

"clock display" (when the unit is used on its own)

fi

"elapsed

track time."

Remaining track time

(Remaining play time from the part of the track now playing to
the end of the same track)

When playing a disc that contains more than 30 tracks, the
"--:--" will be displayed as the remaining track time for track
31 and subsequent tracks.

Total remaining time

(Remaining play time from the part of the track now playing to
the end of the last track on the disc)

CD

TRACK

TRACK

TIME

This lights.

CD

TRACK

REM

TRACK

TIME

TRACK

TOTAL

REM

TIME

Advertising