Miele DA 188 - Manual (Page 11)

,WARNING. TO REDUCE THE
RISK OF ELECTRIC SHOCK
OBSERVE THE FOLLOWING:
Before servicing and repairing the
range hood, disconnect it from the
household electrical supply,
–
by switching off the house panel
circuit breaker
or
– by completely unscrewing
screw-type fuses from the
house fuse panel
Housing
The surfaces and control panel are
sensitive to scratching and cutting.
To keep from damaging them, it is
important to read the following
instructions.
Use only a soft cloth with some dish
liquid and warm water to clean all
surfaces and the control panel.
Dry all surfaces with a soft cloth.
In the control panel area, do not use
excess moisture in cleaning, to
prevent dampness from getting into
the electronics.
Avoid:
– cleaning products that contain
washing soda, acids, bleach or
solvents,
– abrasive cleansers, such as scouring
powder or scouring liquid, scrubbing
sponges, such as pot scrubbers, or
used sponges that still contain
abrasive cleanser residue.
Grease filters
The re-usable metal grease filters in the
appliance trap the solid components
present in cooking vapour (grease,
dust, etc.), and this helps keep the
exhaust hood clean.
We recommend cleaning the grease
filters every 3-4 weeks, before the
residue solidifies.
A filter with excessive grease carries
the risk of fire.
^ Open the grease filter locking clips
and remove the filter downwards.
To prevent damage to the filter and
the cooking surface, hold the filter
securely when handling it.
Cleaning and care
11