Monessen Hearth ILDV20PV - Manual (Page 13)

83D0511
ILDV20/ILDV30 Fireplace Insert
13
VeNt iNStALLAtiON
W
ARN
iNG
• Make sure the exhaust pipe on heater connects to exhaust
portion of cap. Attach flex liners. Figure 6
• Do not crimp or rupture liner when bending it into chimney
offsets.
VeNt RequiReMeNtS
• The exhaust vent must reline the entire length of chimney and terminate above chimney top.
• Vent must meet all vent manufacturer's requirements when installed.
• Make sure you have the following before installing unit:
• 3" and 3" UL 1777 Listed gas liner for air inlet and exhaust.
• Vertical termination kit (AI31TK33A, HEDV3T81, HEDV3T11, HEDVRT)
FP1922
vent requirements
9/08
Maximum Height 40'
(1.9 m)
Minimum Height 10'
(3 m)
Exhaust
Inlet
Figure 6
Venting Unit
FP19