Motorola V260/V262 - Manual (Page 71)

69
Phon
e Fe
ature
s
To Place Calls
Advanced Voice Dialing lets you use voice commands to
place a call:
• Use Name Dial to dial a Contacts entry by speaking the
name of the entry.
• Use Digit Dial to dial any number by speaking the digits
in the number.
Note: This feature recognizes only 7-digit, 10-digit, and
11-digit numbers. It will not dial 3-digit numbers such as
911. To make an emergency call, use the phone keypad to
dial and send the number.
Action
1 Press and release the voice button on the right
side of the phone.
Your phone displays Say a command and plays the
same prompt out loud.
2 Say “Name Dial” or “Digit Dial.”
3 When prompted, say the name of the Contacts
entry or speak the digits in the phone number.
If the phone recognizes the name or number, it
places the call.
If the phone asks you to repeat a name or
number, say it again. If the name or number is
not valid or not recognized, the phone does not
place the call.