Philips Magnavox VR201BMG - Manual (Page 19)

Remote Control Buttons (cont’d) 19
CLEAR Button
Press to erase incorrect data when programming VCR functions.
Also, press to reset the real-time counter. Details are on page 34.
VCR/TV Button
Use to select the signal that your TV receives.
VCR Position ●
Use to watch a tape, to watch a program while recording it, or to watch
a TV broadcast using the CHANNEL o/p or Number buttons to
change channels at the VCR. If the VCR/TV light appears on the display
panel of the VCR, it is in VCR position.
TV Position ●
Use to watch TV (changing channels at the TV) or to watch one program
while recording another. Details are on page 26. If the VCR/TV light
doesn’t appear on the display panel of the VCR, it is in TV position.
POWER EJECT VCR/TV
1 2 3
4 5 6
7 8 9
0
CHANNEL
MEMORY
STATUS/EXIT CLEAR MENU
REWIND /PLAY F.FWD
REC/OTR PAUSE/STILL /STOP
SPEED
STOP/p Button
Press to stop the tape. Press to select an item in the VCR menu.
CHANNEL o /p Buttons
Press to change channels at the VCR.
EJECT Button
Press to eject the tape.
PAUSE/STILL Button
While recording, press to pause the recording. Press again to
resume recording. Details are on page 25. You can not pause a
One-Touch Recording. During tape playback, press to freeze the
picture. Each press of the PAUSE/STILL button will cause the
noise lines to move on the screen. Press PLAY to resume normal
playback. Details are on page 35.
F.FWD(Fast Forward)/B Button
When playback is stopped, press to fast forward the tape at high
speed. During playback, press to fast forward the tape while the pic-
ture stays on the screen. Details are on page 35. Press to advance to
the next menu or to change the setting of an item in the menu.