Mitsumi electronic C10 SERIES - Manual (Page 23)

3. TV Menus 23
For assistance call 1(800) 332-2119
Use the TV’s channel menus to:
Save a list of favorite channels (see • page 10 ).
Define the source for the antenna input •
Perform a channel scan •
Limit • CH /CH tuning to only the channels you want
Selectively scan for new channels •
Add a single channel by RF channel number •
Favorites
See page 10 for use of the Favorites menu.
Editing the Channel List
Use the • Channel Edit menu so the TV tunes only to
the selected channels when using the CH / key.
Channels marked with a check are in memory. •
Press • to move through channel numbers one
at a time.
To add or delete a channel from • memory, highlight
the channel number and press ENTER to remove the
check.
To jump to a channel, enter the channel number, •
including separator, and press ENTER. For example,
to jump to 36-1: 3 6 1 ENTER.
Use the • Mark All or Unmark All options if working
with many channel numbers.
Enter the channel number to jump quickly to a channel.
Checked channels can be tuned with the CH / key.
Cha nnels
Changing the Channel Source
Highlight the source connected to the TV’s antenna
input.
Air • if you have an over-the-air antenna
Cable • if you have direct cable service without a
box.
Press ENTER to confirm your selection.
Scanning Channels
Perform a channel scan after
Initializing the TV •
Changing the source (switching between an over- •
the-air antenna and direct cable service)
Repositioning the antenna
•
Transporting the TV to a different area •
The channel scan will erase all custom channel settings
(channel locks, favorite channels, channel-list edits).
Note: Additive Scan must be OFF to enable a full
channel scan.