Motorola 2200 - Manual (Page 147)

147
Step Mode: A CLI Configuration Technique
The Motorola Netopia® Gateway command line inter face includes a step mode to automate the pro-
cess of entering configuration settings. When you use the CONFIG step mode, the command line inter-
face prompts you for all required and optional information. You can then enter the configuration values
appropriate for your site without having to enter complete CLI commands.
When you are in step mode, the command line inter face prompts you to enter required and optional
settings. If a setting has a default value or a current setting, the command line inter face displays the
default value for the command in parentheses. If a command has a limited number of acceptable val-
ues, those values are presented in brackets, with each value separated by a ver tical line. For example,
the following CLI step command indicates that the default value is
off and that valid entries are lim-
ited to on and off .
option (off) [on | off]: on
You can accept the default value for a field by pressing the Return key. To use a different value, enter it
and press Return.
You can enter the CONFIG step mode by entering set from the top node of the CONFIG hierarchy. You
can enter step mode for a par ticular ser vice by entering set service_name . In stepping set mode
(press Control-X <Return/Enter> to exit. For example:
Netopia-3000/9437188 (top)>> set system
...
system
name (“Netopia-3000/9437188”):
Mycroft
Diagnostic Level (High): medium
Stepping mode ended.
Validating Your Configuration
You can use the validate CONFIG command to make sure that your configuration settings have
been entered correctly. If you use the validate command, the Motorola Netopia® Gateway verifies
that all required settings for all ser vices are present and that settings are consistent.
Netopia-3000/9437188 (top)>> validate
Error: Subnet mask is incorrect
Global Validation did not pass inspection!
You can use the validate command to verify your configuration settings at any time. Your Motorola
Netopia® Gateway automatically validates your configuration any time you save a modified configura-
tion.