Marshall electronic V-LCD70P-HDA - Manual (Page 7)

7
Rear Panel Features
Component and Composite Input and Output
The V-LCD70P-HDA has HD component (YPbPr)
and composite inputs, as well as an active loop-
through output for each input. See page 8 for
supported video formats. These inputs are internally
terminated with 75 ohms.
Power Input
Connect 12VDC to the 4-Pin XLR power input
connector. Power can be supplied from the included
power supply, or from a variety of DC sources
supplying at least 1 Amp at 12 Volts.
IMPORTANT: If using a power source other than the
included power supply, be sure that the polarity of
the DC input is correct:
Pin 1: GND
Pin 2: N/C
Pin 3: N/C
Pin 4: +12VDC
Battery Adapter
The V-LCD70P-HDA can be powered from a variety
of batteries. Several user-interchangeable battery
adapters are available. See page 18 for available
adapters.
¼-20 Mounting Hole
Use the ¼-20 mounting hole to attach the monitor to
a camera or variety of mounting devices.