Oven care, Warning, Timed cooking – Maytag W10203503B User Manual

Page 6: General cleaning, Oven light

Advertising
background image

6

Timed Cooking

(on some models)

To Set a Timed Cook:

1. Press BAKE. The bake indicator light will light up.
2. Press the TEMP/TIME “+” or “-” arrow pads to enter a

temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press the TEMP/TIME “+” or “-” arrow pads to enter the length

of time to cook.

5. Press START. The display will count down the time. When the

time ends, the oven will shut off automatically, “End” will
appear on the display, and End of Cycle tones will sound.

6. Press CANCEL to clear the display.

To Set a Delayed Timed Cook:

Before setting, make sure the clock is set to the correct time of day.
See the “Clock” keypad feature in the “Feature Guide” section.
1. Press BAKE.
2. Press the TEMP/TIME “+” or “-” arrow pads to enter a

temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press TEMP/TIME “+” or “-” arrow pads to enter the length of

time to cook.

5. Press DELAY. The start time/delay oven indicator light will light

up.

6. Press TEMP/TIME “+” or “-” arrow pads to enter the time of

day to start.

7. Press START.
When the start time is reached, the oven will automatically turn on.
The temperature and/or time settings can be changed anytime
after pressing Start by repeating steps 2-7. When the set cook time
ends, the oven will shut off automatically and “End” will appear on
the display.
8. Press CANCEL to clear the display.

OVEN CARE

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and
the oven is cool. Always follow label instructions on cleaning
products. For additional information, you can visit the Frequently
Asked Questions (FAQs) section of our website at
www.maytag.com.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use
soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,
steel-wool pads, gritty washcloths or abrasive paper towels.
Damage may occur to stainless steel surfaces, even with one-time
or limited use.
Cleaning Method:

Rub in direction of grain to avoid damaging.

Stainless Steel Cleaner and Polish Part Number 31462 (not
included):
See cover for contact information.

Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths or abrasive paper
towels.
Cleaning Method:

Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.

All-Purpose Appliance Cleaner Part Number 31682 (not
included):
See cover for contact information.

OVEN CAVITY

Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.

OVEN RACKS

Cleaning Method:

Steel-wool pad

For racks that have discolored and are harder to slide, a light
coating of vegetable oil applied to the rack guides will help
them slide.

Oven Light

The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the off position.

To Replace:

1. Unplug oven or disconnect power.
2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in oven or reconnect power.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before
or after cooking.

Doing so can result in food poisoning or sickness.

Advertising
This manual is related to the following products: