Muratec MFX-1500E - Manual (Page 33)

1.21
Getting started
11 Now, everything is up to the machines — yours and the one you’re dialing.
When it makes contact, your machine transmits the stored document from
memory.
Important: If you want to cancel a transmission while scanning the docu-
ment, press the STOP key.
If you want to cancel a transmission in progress, use the Review
Commands function. See “Review Commands, an introduction”
page 1.23.
12 At the end of the operation, your fax machine beeps and displays:
Important: Whenever you transmit a document, what actually appears on
the top line of the display depends on information stored in the
remote fax. The line may even be blank.
Note: If the call fails, see “Redialing,” page 1.22.
Sending a fax using monitor/call or a handset
You also can fax a document using either the monitor speaker or the optional
handset to dial the call.
Note: Faxing this way disables “V.34” mode and sends the fax in normal ITU - T
Group 3 fashion. This may slow transmission for this document. See page
3.20 for more information.
1 Insert the document to the ADF .
2 Adjust resolution and contrast if necessary.
Press
RESOLUTION to change the resolution.
Press CONTRAST to change the contrast.
3 Obtain a dial tone, either by:
• Pressing
MONITOR / CALL
… or …
• Lifting the optional handset.
In either case, the LCD shows:
4 Enter the fax number by using the numeric keypad.
Also, enter access codes with the number, just as for a regular phone call.
Note: For information on one-touch and speed-dial numbers, see 2.8–2.14.
5 When you hear fax tones from the remote unit, press START .
Note: If a person answers the phone, use the optional handset to tell that
person that you’re trying to send a fax. When you hear fax tones,
press
START .
6 If you’re using an optional handset, hang up after pressing START .
7 At the end of the operation, your fax machine beeps and displays:
Note: If the call fails and you used MONITOR / CALL to dial, press
MONITOR / CALL to hang up. Or if you’ve pressed START to begin the fax
transmission, press STOP to end it.
Also see “Redialing manually,” next page, if the call fails.
972-555-2009
** Complete **
** Tel Mode **
919725552009_
** Tel Mode **
_
972-555-2009
** Complete **