MSI MS-7242 - Manual (Page 51)

3-15
BIOS Setup
Power Button Function
This feature allows users to configure the Power Button function. Settings are:
[Power Off] The power button functions as a normal power-on/-off button.
[Suspend] W hen you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.
Restore On AC Power Loss
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Setting options:
[Off] Leaves the computer in the power off state.
[On] Leaves the computer in the power on state.
[Former-sts] Restores the system to the status before power failure or
interrupt occurred.
Wake Up Event Setup
Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state.
Resume By PS/2 Keyboard
The item specifies how the system will be awakened from power saving mode
when input signal of the PS2 keyboard is detected. Use the <PageUp> &
<PageDown> keys to select the options. W hen selecting [Password], enter the
desired password.
Keyboard Password
If Resume By PS/2 Keyboard is set to Password, then you can set a pass-
word in the field for the PS/2 keyboard to power on the system.
Resume By PS/2 Mouse
This setting will be disabled when Resume By PS/2 Keyboard is set to [Any
Key]. It determines whether the system will be awakened from what power
saving modes when input signal of the PS/2 mouse is detected.