Motorola RDV2080D - Manual (Page 62)

PROG
RAM
M
ING
FEATUR
ES
English
60
To program the CTCSS/DPL code, scroll
through the programming options by short
pressing the PTT button until your radio display
shows:
To program the desired code, scroll using /
buttons until you get the desired CTCSS/
DPL code value. Long press the PTT button to
exit and save or short press the PTT button to
go to the next programming feature without
saving.
To program the Bandwidth TX scroll down/up
with the
/ buttons until you get the
following screen:
To program the desired bandwidth (HI = 25
kHz, LOW = 12.5 kHz), toggle the
/
buttons to select the value. Long press the PTT
button to exit and save or short press the PTT
button to go to the next programming feature
without saving.
Note: If the value of the bandwidth can not be
changed, the setting will be displayed solidly
T
X
BW T
X
BRUS_display.book Page 60 Monday, January 16, 2012 5:28 PM