Xcarét pro expansion bay cdrw drive 5 – MCE Technologies Xcart Pro User Manual

Page 6

Advertising
background image

Xcarét Pro Expansion Bay CDRW Drive

5

2) simultaneously press the Command and Y keys on the

PowerBook’s keyboard;

3) drag the icon of the CD onto the Trash icon on the Desktop; or
4) select "Make Right Module Removable" using the expansion bay

control strip.

The Xcarét Pro CDRW has an emergency CD tray eject mechanism in
the event that none of the previously mentioned CD tray eject methods
are effective. Carefully insert the end of a straightened paperclip into the
small hole under the activity LED on the front of the drive. Once the
paperclip encounters resistance, apply a slight pressure with it and then
remove it from the hole. The CD tray will disengage.

Removing the Xcarét Pro CDRW Drive

To remove the drive from the PowerBook, one of the following condi-
tions must be met:

1) your PowerBook must be powered off, or
2) your PowerBook must be in Sleep mode, or
3) if your PowerBook is powered on make sure that the expansion

bay control strip indicates that the "Right Module Is Removable."

If you are unsure about condition 3, then make sure that the PowerBook is
either off or asleep before removing the drive from the PowerBook. Once
one of the above conditions is met, then gently pull on the right side media
bay eject lever. The drive will be ejected partially and you may now grasp
it and pull it completely out of the PowerBook media bay.

emergency

eject hole

eject button

Advertising