Mitel KF750 - Manual (Page 77)

77
S
ettings
01
02
03
04
05
06
07
08
TIP! See page 12 for information on
Installing a memory card.
Using flight mode
Turn on flight mode by pressing
in standby screen, and then select Phone
settings - Profiles. Select Flight mode and
press
to activate.
Flight mode will not allow you to make calls,
connect to the Internet, send messages or
use Bluetooth.
Sending and receiving your files
using Bluetooth
Bluetooth is a great way to send and receive
files as no wires are needed and connection
is quick and easy. You can also connect to
a Bluetooth headset to make and receive
calls.
To send a file:
1 Open the file you want to send, typically
this will be a photo, video or music file.
2 Select Options choose Send. Choose
Bluetooth.
3 Select Yes to turn Bluetooth on.
4 Your KF750 will automatically search for
other Bluetooth enabled devices within
range.
5 Choose the device you want to send the
file to and select Select.
6 Your file will be sent.
TIP! Keep an eye on the progress bar to
make sure your fi le is sent.
To receive a file:
1 To receive files your Bluetooth must
be both On and Visible. See change
your Bluetooth settings below for more
information.
2 A message will prompt you to accept the
file from the sender. Select Yes to receive
the file.
3 You will see where the file has been saved
and you can choose to View the file or
Use as wallpaper. Files will usually be
saved to the relevant folder in My Files.
Changing your Bluebooth settings:
1 Press in standby screen, and
choose Settings.
2 Choose Bluetooth then Settings.
Make your changes to:
My device visibility - Choose to be
Visible, Visible for 1 min or Hidden.
My device name - Enter a name for your
KF750.