Metz LCD-TV - Manual (Page 9)

9
Selecting stations from the station table
In normal TV or radio 1) mode, you can display
the station table by pressing the white key.
Press the white key repeatedly to display a vir-
tual keyboard. Use the respective key to sort the
station list alphanumerically.
In the table which is then displayed, you can use
the oval rocker key "P+/P-" or the
numeric keys to select the desired station
and then press the "OK" key to display
this station.
If the station table contains more than
20 stations, you can display the next 10
stations by pressing the oval cursor con-
trol key
̇ ̈.
Back to the last station
You can use the red key to switch
back and forth between the last two sta-
tions you have selected.
1) Possible only in DVB mode !
Station selection and manage-
ment of programme positions
The TV set can store the settings for up to
2000 TV stations and 2000 radio stations
in so-called programme positions. You
can select any of these programme posi-
tions with the numeric keys, with the oval
rocker key "P+/P-" or from the station
table.
If you use the numeric keys for station
selection, the first digit you enter is nor-
mally the "thousands" digit. If less than
1000 programme positions are occupied,
it automatically becomes the "hundreds"
digit.
If less than ten programme positions are
occupied, the first digit you enter automa-
tically becomes the "units" digit.
After pressing any numeric key, you have
three seconds to press further numeric
keys
6. Station Selection
6. Programmwahl Opening the menu
10 Kabel 1
9 Nord 3
8 RTL
7 PRO 7
6 Nord 3
5 PRO 7
4 SAT1
3 Bayern 3
2 ZDF
1 ARD
56 Hessen 3
55 SW-BW
54 N-TV
53 West 3
52 Phönix
Select with ᕪ...ᕩ
or .
Confirm with .
³ ᕢABC »DEF
³GHI ᕢJKL »MNO
³PQRS ᕢTUV »WXYZ OK
2x
606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 9