Macsense Connectivity HomePod - Manual (Page 33)

27
continue to play while the LCD goes into sleep mode. Pushing any
buttons on the HomePod will turn the LCD back on. This function is
designed to protect and extend the life the LCD when it is not needed
for viewing. The default setting is "Never".
To turn on the LCD Sleep function:
1. Access the web-config page of HomePod.
2. Click on the Miscellaneous tab, and set the LCD Sleep time to
either 1, 5, or 15 minutes.
3. Click on the "Submit" button to save the settings.
4. Reboot HomePod.
8.3.2 System Shutoff Function
HomePod also offers a System Shutoff function that will turn the whole
unit off at a designated time to protect the unit from unnecessary
prolonged usage. This function is designed for people who use
HomePod to sooth them to sleep. The default setting is "Never".
To turn on the System Shutoff function,
1. Access the web-config page of HomePod.
2. Click on the Miscellaneous tab, and set the unit System Shutoff
time to 15, 30, or 60 minutes Click on the "Submit" button to save
the settings.
3. Reboot HomePod.