Maretron GPS200 - Manual (Page 12)

GPS200 User’s Manual
Page 8 Revision 1.2
5 Troubleshooting
If you notice unexpected operation of the Maretron GPS200, follow the troubleshooting
procedures in this section to remedy simple problems.
Symptom Troubleshooting Procedure
No data output Check the connections to the NMEA
2000
®
connector and tighten if
necessary
Ensure that power is supplied to the
connected NMEA 2000
®
cable
Ensure that the GPS200 has a clear
view to the horizon in all directions
Ensure that no VHF, satellite, or radar
antennas have been mounted near the
GPS200
If these steps do not solve your problem, please contact Maretron Technical Support (refer to
Section 7 for contact information).
Warning: There are no user-serviceable components inside the Maretron GPS200. Opening
the GPS200 will expose the sensitive electronic components to adverse environmental
conditions that may render the unit inoperative. Please do not open the GPS200, as this will
automatically void the warranty. If service is required, please return the unit to an authorized
Maretron service location.