MSI FUZZY 945GME1 - Manual (Page 46)

MS-7265 Mainboard
3-12
Integrated Peripherals
SATA Mode
This item allows you to configure SATA mode
[IDE] As serial ATA only.
[RAID] As SATA RAID mode Supporting RAID0,1,5,10.
[AHCI] If AHCI is chosen, it allows you to enable SATA Stagger
Spinup Support (not RAID mode) and take all hard disks
on board as master.
On-Chip Serial ATA A
This setting is used to specify the SATA controller. The settings are:
OnChip IDE Device
Press <Enter> and the following sub-menu appears:
PDF created with pdfFactory Pro trial version www.pdffactory.com