Minuteman UPS SNMP-32 Series - Manual (Page 5)

5
Fig. 2-SNMP-32S Card
Ethernet port — The connection for the LAN
LAN Port LEDs — See the LAN Port LED Table below
Modem port — The connection for an External Modem
ENV port — The connection for a Temperature/Humidity Probe
Status LEDs — See the LED Table below
Status LED Table
Yellow Red Green Status
OFF OFF Solid ON Power ON
Flashing Solid ON Solid ON System initial
Solid ON OFF Solid ON Normal operation
Solid ON Flashing Solid ON No connection to UPS
Flashing Flashing Solid ON Writing data to flash memory
Green LED (PWR): Power state
Red LED (Link): Correspondence state with UPS
Yellow LED (Action): Correspondence state with the Network
LAN Port LED Table
Yellow Green Status
OFF Solid ON Network Connectivity speed is 100M
OFF Flashing Transmitting data
Solid ON OFF Connectivity speed is 10M
Flashing OFF Transmitting data
Green LED (Connectivity): 100M
Yellow LED (Connectivity): 10M
1-2. Package Contents
Internal SNMP-32 card Package Contents
The contents of the package are:
U
SNMP-32 Card
U
RJ11 to RS232 Serial Cable (SNMP-32S) for external modem only
U
CD
The CD contains a Quick Install Procedure, SNMP Utility software, MIB files: dgpups.mib supports UPS, dgprpm.mib
supports RPM, ENV, CPS and ATS, Acrobat Reader and the User’s Manual. Copy the MIB file to the appropriate NMS
MIB directory for the UPS connected to your SNMP-32 card.