Mega System Tech RS485 - Manual (Page 8)

NET101 User’s Manual -6-
Chapter 2: Installation Procedure
Connect the designated serial device, power
adaptor and Ethernet cable to NET101
(Chapter 3)
Install Netility supplied in the Utility CD.
Use Netility to setup the IP (for Static IP)
(Chapter 4)
Open a standard web browser, key in the IP
and go thru the configuration in
“NET101 Web Manager”
(Chapter 5)
Set-up completed
Chapter 2: Installation Procedure
Before you start using NET101, you will need to set-up both the hardware and
software. The following is a flow chart on the installation procedure:
Fig.8 NET101 installation flowchart