MITSUBISHI ELECTRIC N0701 - Manual (Page 16)

E-8
• If reflected light makes it hard for you to see your screen, use an
anti-glare filter.
• Adjust the monitorís brightness and contrast controls to enhance
readability.
• Use a document holder placed close to the screen.
• Position whatever you are looking at most of the time (the screen or
reference material) directly in front of you to minimize turning your
head while you are typing .
• Get regular eye checkups.
Cleaning Your Monitor
When cleaning the monitor, please follow these guidelines:
•
Always unplug the monitor before cleaning.
• Wipe the screen and cabinet front and sides with a soft cloth.
• If the screen requires more than dusting, apply a household window
cleaner to a soft cloth to clean the monitor screen.
• Do not use benzene, thinner or any volatile
substances to clean the unit as the finish may be
permanently marked.
• Never leave the monitor in contact with rubber or
vinyl for an extended time period.
• Do not spray directly on the screen as cleaner may
drip into the monitor and damage the circuitry.
• Never use an abrasive cleaner on the screen
surface as this will damage the anti-reflection
coating.
Ergonomics
To realize the maximum ergonomics benefits, we recommend the
following :
•
Adjust the brightness until the background raster disappears .
• Do not position the contrast controls to its maximum setting .
• Use the preset size and position controls with standard signals .
• Use the preset color setting and sides Left / Right controls.
• Use non-interlaced signals with a vertical refresh rate between
75-120Hz.
• Do not use primary color blue on a dark background, as it is
difficult to see and may produce eye fatigue due to insufficient
contrast.
CAUTION