McIntosh C500 - Manual (Page 26)

26
Remote Control Push-Buttons
Selects one of the seven
High Level Audio/Video
Sources or Phono Input
Turns AC Power ON or OFF to
certain McIntosh Components
when connected via the Data Port
Adjusts the volume
level up or down
Selects Disc Player, Mu-
sic Server or Tape Re-
corder Functions and also
performs various func-
tions on a variety of
McIntosh Components
Press to Power the
C500 ON or OFF
Use to select tuner pre-
sets, disc tracks or any
numbered operation
Selects Switched Output
2, FM Tuner Operating
Functions and Track Se-
lection on certain McIn-
tosh CD Players
Mutes the audio
Note: Push-buttons whose function is not indentified
above are for use with other McIntosh Products.
Press MODE to switch the
MONO Mode On or Off
Selects Switched Output 1,
AM Tuner Operating Func-
tions and Disc Selection on
certain McIntosh CD Players
Selects On Screen Func-
tions for McIntosh DVD
Players and certain CD
Players
Press TRIM and then
the LEVEL Push-but-
tons to select and ad-
just various functions
Selects the FF (Fast For-
ward) or REWind Mode
on a Disc Player, Music
Server or Tape Recorder;
tunes Up or Down the
AM/FM Dial
Selects Functions for McIntosh
Home Controller and as a “shift”
key when used with the AM or FM
push-buttons to select Output 1 or 2
Press +10 to Review Tuner
Station Presets and select
certain functions on McIn-
tosh CD Players
LED illuminates during
the time a remote com-
mand is sent to the C500
Press to Power ON
the C500
Press to Power OFF
the C500
Switches OFF the entire
C500 System except in
Passthru Mode
Scrolls through the
available C500 Inputs
and the McIntosh
MDA1000
Digital
Sources when connected
to the D/A Input
1
Press to listen to the se-
lected Record out signal
1 Requires a Data Cable Connection between the C500C and the MDA1000