Mitel 5212/5224 - Manual (Page 34)

-29-
Messaging - Callback
To leave a Callback Message when you hear busy or ringback tone:
z
Press ( MESSAGE ) or, on a 5224 IP Phone only, press the Callback
softkey.
To respond to a message waiting condition on your 5212 IP Phone:
1. Press ( MESSAGE ).
2. If a password is required, dial your password.
3. Do one or all of the following:
„
To call the message sender, press #.
„
To erase the message, press *.
To respond to a message waiting condition on your 5224 IP Phone:
1. Press ( MESSAGE ).
2. If a password is required, dial your password (and press the Enter
softkey if available).
3. Press the Yes softkey, and do one or all of the following:
„
To display the time the message was sent, press the More softkey.
„
To display the number of the caller, press the More softkey twice.
„
To call the message sender, press the Call softkey.
„
To delete the message, press the Erase softkey.
„
To view the next message, press ( MESSAGE ).
On a 5224 IP Phone only, you can check for messages from a remote
station:
1. Press ( SUPERKEY ).
2. Press the No softkey until "Remote Msging?" appears.
3. Press the Yes softkey.
4. Dial your extension number.
5. Press the Enter softkey.
6. If a password is required, enter your password and press the Enter
softkey.
7. Press the Yes softkey.