Magnadyne MV-DVD-PL3 - Manual (Page 17)

17
Setup
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
MAIN PAGE
ON
OFF
SCR Saver Setup
Select the SCR SAVER output ON or OFF.
DOWNMIX
MAIN PAGE
LT/RT
STEREO
SPEAKER Setup
This activates the audio output from
DOLBY AC3 5.1 DOWNMIX to 2-Channel
mode. Select the preferred SPEAKER con-
nection by using the cursor buttons.
• Select LT/RT to activate the Dolby surround
compatible output.
• Select STEREO to activate the simple
stereo mode.
AUDIO OUT
OP MODE
DYNAMIC
LPCM OUTPUT
MAIN PAGE
ANALOG
SPDIF/RAW
SPDIF/PCM
AUDIO Setup
This activates the audio output from ANALOG
mode to SPDIF/RAW mode to SPDIF/PCM
mode.
AUDIO OUT
OP MODE
DYNAMIC
LPCM OUTPUT
MAIN PAGE
LINE OUT
RF REMOD
OP MODE
There are two operating modes for the
Dolby Digital decoder: LINE OUT and RF
REMOD.
• LINE OUT - with digital dialog normal-
ization. (Recommended)
• RF REMOD - with heavy compression
and digital dialog normalization.
– GENERAL SETUP PAGE – – AUDIO SETUP –
– AUDIO SETUP – – SPEAKER SETUP –
MV-DVD-PL3_Rev.C.qxp 6/14/04 4:31 PM Page 17