Magellan eXplorist 400 - Manual (Page 13)

Navigation Screens 6
Changing a Navigation Field
Each navigation field can be customized to display latitude, longitude, heading, bearing, distance to
next waypoint, distance to the end of a route, time to next waypoint, time to complete the route,
time of day, date, destination, cross track error (XTE), elevation, current speed, average speed or
maximum speed.
1. Press Enter to highlight the fields. Use the cursor control to highlight the field you want to
change and press Enter.
A screen will be displayed with all of the options available. Highlight the data field you want
displayed and press Enter.
Satellite Status
This screen graphically displays the satellites and their signal strength that
are being used to compute your location. Handy screen to view when you are
getting weak to poor signal reception. There are also two navigational screens
displayed at the bottom of the display.
Changing a Navigation Field
1. Press Enter to highlight the fields. Use the cursor control to highlight
the field you want to change and press Enter.
A screen will be displayed with all of the options available. Highlight
the data field you want displayed and press Enter.